EnglishChinese
about usproductsrecruitinvestorsadvertisesite mapcontact
Home
Product Top > Product > RADIO FREQUENCY PRODUCT > MICROWAVE DIELECTRIC CERAMICS
MICROWAVE DIELECTRIC CERAMICS
Page 1 >>>Page 2 >>> Page 3 

The microwave dielectric ceramic is used in the microwave band and is very effective for making smaller devices and improving the packaging density of microwave integrated circuits. For this reason, it is widely used for filters for mobile communication apparatuses (for base station and terminals) including cell phones, microwave transmitting circuit for receiving satellite broadcasting, GPS antenna, bluetooth, and recently for ITS (Intelligent Transportation System).

MARUWA's dielectric items are classified into 3 types
1. Coaxial resonator (TEM mode)
2. LNB (TE018 Mode)
3. GPS, board

■Features
•   The specific inductive capacity (εr) is large, the microwave circuit can be made smaller, and the dielectric loss is very small so that a high Q value can be obtained in the microwave area.
•   Since the frequency temperature coefficient (τf) is compensated, a stable circuit configuration can be made.
•   Since variance in the specific inductive capacity is small (stable), a good circuit configuration can be made.
•   In accordance with applications, various shapes are available to meet your requirements.

■Major Types and Features
Material name Dielectric resonator Dielectric board
Disk type Cylindrical type Square
cylindrical type
Square
plate type
Square
block type
Shape
Characteristic High Q value High Q value
Usable for smaller type
Usable for smaller type High dimensional accuracy Usable for
smaller type
High dimensional
Dimensions D=50 or smaller
L=30 or smaller
D=50 or smaller
d=0.5 or larger
L=30 or smaller
A=40 or smaller
a=0.5 or larger
L=30 or smaller
A, B=51 or smaller
T=0.1~8.0
A, B=25 or smaller
a=0.6 or larger
T=6 or smaller
Applicable
dielectric material
M20~45 M20~110 M20~110 M20~180 M20~110
Specific
inductive capacity
20~45 20~110 20~110 20~200 20~110
Notes Available to add support
AG metalization only
AG metalization only



■Characteristics of materials
Material name εr foQ τf
(10~50°C)
(ppm/°C)
Specific gravity
(g/cm3 )
M6.8 6.8±0.5 ≥25000 -20±5 3.0
M8 8.5±0.5 ≥40000 -10±5 3.1
*M20 20.5±0.5 ≥50000 0±5 3.8
M24 24.0±1.0 ≥200000 1.5±5 7.5
M29 29.0±1.0 ≥170000 0±1 7.7
M34 33.5±1.0 ≥90000 3± 2 7.0
*M38 38.0±0.5 ≥35000 8± 3 4.6
*M39 40.0±1.0 ≥30000 5±5 5.2
M45 45.0±2.0 ≥40000 3±1 4.7
M80 82.0±2.0 ≥8000 5±5 5.7
M93 93.0±2.0 ≥6000 8±3 5.7
M110 110.0±3.0 ≥3300 5±5 5.7
M130 129.0±2.0 ≥1800 45±10 5.9
M140 134.0±4.0 ≥2000 30±10 4.8
M180 185.0±4.0 ≥100 -140±30 4.8
* : mass production materials
MARUWA's dielectric items are classified into 3 types.
1. Coaxial resonator (TEM mode)
This is mainly used for filters for communication apparatuses (band pass filter [BPF] , duplexer [DUP] ) and VCO.
2. LNB (TE018 Mode)
This is mainly used as an antenna resonator for receiving satellite broadcasting.
3. GPS, board
Antenna block is used as a plane antenna (GPS antenna) for car navigation, W-LAN, bluetooth, mobile phone antennas.
The board is used as the material for single-layer capacitors such as filters and isolators.

The using methods for 1, 2, and 3 and specific shapes are as follows.
Page 1 >>>Page 2 >>> Page 3 


COPYRIGHT 2009 MARUWA Co., Ltd. ALL RIGHT RESERVED.

New Product Information